Kamis, 06 Oktober 2016

How to set alarm on Casio AW-82

0 komentar
Casio AW-82D-7AV
How to set alarm on Casio AW-82
1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.
How to set alarm on Casio AW-82
  • To set a one-time alarm, display one of the screens indicated by alarm number 2 or 3. To set the snooze alarm, display the screen indicated by1.
2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash, which indicates the setting screen.
  • This operation automatically turns on the alarm.
3. Press C to move the flashing in the sequence shown below to select other settings.
How to set alarm on Casio AW-82
4. While a setting is flashing, use D (+) and B (–) to change it.
  • To set an alarm that does not include a month (daily alarm, monthly alarm), set – for the month. Use D and B until the – mark appears (between 12 and 1) while month setting is flashing.
  • To set an alarm that does not include a day (daily alarm, 1-month alarm), set — for the day. Use D and B until the — mark appears (between the end of the month and 1) while the day setting is flashing.
  • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (A indicator) or p.m. (P indicator).
5. Press A to exit the setting screen.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off or change it to a one-time alarm.
  • To stop the alarm tone after it starts to sound, press any button.
  • Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn Alarms 2 and 3, and the Hourly Time Signal on and off
How to set alarm on Casio AW-82
1. In the Alarm Mode, use D to select a one-time alarm (alarm number 2 or 3) or the Hourly Time Signal (:00).
2. Press A to toggle it on and off.
  • Turning on a one-time alarm (2 or 3) displays the alarm on indicator on its screen.
  • Turning on the Hourly Time Signal displays the hourly time signal on indicator.
  • The alarm on (ALM) indicator and Hourly time Signal on (SIG) indicator are displayed in all modes.
To select the operation of Alarm1
1. In the Alarm Mode, use D to select Alarm1.
2. Press A to cycle through the available settings in the sequence shown below.
How to set alarm on Casio AW-82
  • The applicable alarm on indicator (SNZ ALM) is displayed in all modes when an alarm is turned on.
  • SNZ indicator flashes during the 5-minute intervals between alarms.
  • Displaying the Alarm1 setting screen while the snooze alarm is turned on automatically turns off the snooze alarm (making Alarm1 a one-time alarm).
Continue reading ...
55571701 081311158735 makinov09 makinov09
 

Kontak

Phone/SMS : +6287878291603
Intagram : makinov09
Twitter : makinov09
Email : makinov@gmail.com
PIN BB : 55571701

Formulir Kontak

Nama

Email *

Pesan *

Blognya Arek Jepang Gang Siji

Radar EMDE

HLR Lookup

My Favourite Blog

Copyright © Emde Berusaha Design by BTDesigner | Blogger Theme by BTDesigner | Powered by Blogger